Peristaltic Pumps

750 Series

Large Capacity

The 750-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as a stainless sleeved roller assembly. The pump is rugged, reliable, and easy to use.

With a flow rate of up to 9.5 GPM at 430 RPM, the 750 is a pedestal-mounted tube pump used extensively in paper and pulp, food, slurry, ink and fluid transfer applications. It is available with fixed or variable speed motors, air motors and in explosion-proof assemblies.

Flow Range: up to 9.5 GPM
Typical Use: Food, slurry, bulk transfer
Configurations: 9 available

800-531-5263

Why this series

Flow rates up to 9.5 GPM at 430 RPM
Pedestal mounted, belt or direct drive
Explosion-proof and air drive assemblies available
755-PHO stainless steel head option

Specifications

Technical detail & compatibility

Published values for the standard configuration. Custom assemblies are available upon request — our team will confirm the exact figures for your application.

At a glance

Flow Range: up to 9.5 GPM at 430 RPM
Speed Range: 0-400 RPM (Zero-Max™)
Housing: Aluminum casting; 316 SS on 755-PHO
Drive Options: Belt, direct, DC, air, explosion-proof

Tubing Sizes

5/8" I.D. x 15/16" O.D.
3/4" I.D. x 1 1/16" O.D.

Browse compatible tubing

Industries

Paper & pulp
Laboratory
Sampling
Bilge
Food
Slurry
Ink
Fluid transfer

Models & Assemblies

9 configurations in the 750 Series

Add any configuration to your quote request and our team will confirm pricing, tubing compatibility, and motor options for your application.

750-PHO

Pump Head Only

Machined from an aluminum casting with a stainless steel plate and shaft as well as a stainless sleeved roller assembly. Rugged, reliable and easy to use.

750-100

Standard Fixed-Speed Pump

A belt-driven pump assembly mounted on a steel base with a 1/3 HP O.D.P. motor with belt and sheave to reduce the speed to the pump head. An excellent choice for fluid transfer applications.

750-101

Zero-Max™ Speed Control Pump

A direct drive unit with a manual speed control providing speed regulation from 0-400 RPM. Comes with a pump head, Zero-Max speed control and a 1/2 HP O.D.P. motor mounted on a steel base. Used for metering, printing and fluid transfer.

750-200

Explosion-Proof Fixed Speed Pump

A belt-driven unit with a 1/2 HP, Class I, Group D, gasoline vapor atmosphere explosion-proof motor. Pump and motor are mounted on a steel base and connected through a belt & sheave running at a constant speed. An excellent choice for applications where explosive vapors are present.

750-201

Explosion-Proof Speed Control Pump

A direct drive unit with a manual speed control providing speed regulation from 0-400 RPM. Comes with a pump head, Zero-Max speed control, and a 1/2 HP, Class I, Group D explosion-proof motor mounted on a steel base.

750-342

Vari-Flow™ DC Speed Control

A DC speed control model mounted on a steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. The unit comes with a speed control in a NEMA IV enclosure. The controls accept a 4-20 mA or 0-10 VDC signal and have forward/brake/reverse capability.

750-362

Vari-Flow™ DC Speed Control

A DC speed control model mounted on a steel base and coupled to a 1/2 HP, 90 VDC, TEFC, 56C face motor flange mounted to a gear reducer. Each unit comes with a speed control in a NEMA IV enclosure accepting a 4-20 mA or 0-10 VDC signal, with forward/brake/reverse capability.

750-455

Air Drive Pump

An assembly consisting of a pump and 1/2 HP air motor and gear reducer mounted on a steel base. The air motor is intended for safe use in applications where there may be explosive vapors or powders present.

755-PHO

Stainless Steel Pump Head

Machined from a 316 SS housing and made with all stainless steel components, the 755-PHO is available as a stand-alone unit or in a variety of assemblies or custom configurations. An excellent choice for applications where the chemical resistance of stainless steel is needed.

Other Series